Suzuki Katana AY50 Race Tuning Guide

Categories: 50cc Tuning, Featured, General Tuning, Maintainence, Performance Parts
Written By: admin

One of the earlier race inspired scooter by Suzuki, featuring upside-down Showa forks and Carbon fibre look dash panels, the Suzuki Katana was an instant hit and quickly became popular for tuning, with plenty of performance race parts from Malossi and numerous other manufacturers.

Early Suzuki Katana’s had the Suzuki air cooled engine in them, whilst later Suzuki Katana’s had Suzuki’s new liquid cooled engine, and where designated AY50R for the race production version.

One notable feature of the Suzuki Katana’s are their very low gearing, which means the engine does more revolutions per wheel revolution compared to other scooters, this provides very quick acceleration but a lower top speed, even on tuned engines, most other derestricted scooters can keep up on top speed, but will struggle to match a race tuned Suzuki Katana on shear acceleration.

Although some people see the Suzuki Katana’s low gearing as a problem, it is also the scooters greatest strength, with blisteringly fast acceleration, most other scooters will struggle to keep up with it in an urban environment, as even when others are tuned and kitted up with performance parts they’ll still struggle to match the Suzuki Katana’s 0-30 times. When the liquid cooled Suzuki Katana is tuned it is practically untouchable against all the other 50cc scooters on the market in these times, it’ll only loose out on longer roads where speeds of 50mph+ can be acheived by other LC scooters.

The Suzuki Katana’s are primarily restricted mostly in the exhaust, so in the very early models it requires binning and replacing with a race exhaust, whilst in the later versions with a 2 part exhaust, you can grind out the internal restrictor cone and refit the exhaust, although nothing will match the performance that an aftermarket race exhaust gives for the Suzuki Katana. On the very early models, the CDI is also restricted and requires replacing with an aftermarket model, although this isn’t a problem on the later scooters.

As with my usual reccommendation, Giannelli Exhausts generally make the best performance exhausts for scooters, and since they’re all e-marked, completely road legal and come with a warrenty when fitted by an authorised mechanic, so are by far the best tuning option for road going Suzuki Katana’s, and all other scooters that are being tuned for the road.

When fitting a Giannelli race exhaust to your Katana, it’ll require a slightly higher jet (0 to 2 sizes on non catalysed Suzuki Katana’s, I don’t think they made any with catalytic converters) and slightly lighter rollers, since performance exhausts allow the Katana to make more power but at a higher rpm. Tuning the rollers to 0.5 - 1 gram lighter than standard generally does the trick for Giannelli race exhausts on the Katana’s, but it varies between exhausts and tunes, and the Suzuki takes 17×12mm rollers, 6.6g as standard.

After fitting a race exhaust, the biggest benefit the Scooter Katana will gain during tuning is by fitting a performance big bore kit, adding a 40% increase in capacity and more than doubling the power. Malossi and Polini make the best big bore kits available for tuning the Suzuki Katana, and will provide the best performance and reliability compared to the cheaper big bore kits on the market . As you’re increasing the capacity with the Malossi big bore kit, a bigger jet is required to be fitted in the carb, usually around 6-8 sizes larger, although doing a plug chop after a test ride to check the jetting is reccommended to check your scooter isn’t running lean after it’s tuning, otherwise it can be liable to go bang.

When tuning your Suzuki Katana, it is important to make sure you run it on the best quality fully synthetic oil, especially with the Katana’s oil pump system, as it can be prone to clogging up the exhausts, especially the standard ones. This is one of the reasons why fitting an aftermarket race exhaust to these scooters can provide such a huge difference on older models.

After fitting the Giannelli race exhaust and tuned big bore 70cc Malossi cylinder kit, you’ll have a exceptionally fast accelerating scooter, but without an amazing top speed increase compared to other scooters, due to the Suzuki Katana’s low gearing. You can now either keep the fast acceleration, or sacrifice a little and fit a Malossi gear up kit to your Katana, allowing it to use some of this new found power provided by your Malossi big bore 70cc kit to give you a better top end, good for another 10mph in most cases. Although it looses some acceleration by fitting a Malossi gear up kit, your scooter will still be faster accelerating than a standard untuned Suzuki Katana, so don’t think a gear up kit will make performance worse than before.  Top Racing also manufacture gear up kits and I have used these in the past too, but Malossi always make the best parts, and I prefer to use Malossi for the peace of mind knowing I have the best performance tuning parts in the business fitted.

For even higher increases in power, bigger carbs and aftermarket variators are available, but do not make as bigger differences as the Giannelli race exhausts, the Malossi big bore 70cc kits and the gear up kits. The Malossi variator will provide a substancial benefit if it is fitted onto a Suzuki Katana that is older and has done a lot of millage, as this combined with a new Malossi Kevlar belt will give a lot smoother acceleration and a slight top speed increase.

Done all this? Consider improving your handling and getting some new tyres and suspension

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google


Got a comment? Comment down below


Got a question? Click here to use the forums


9 Responses to “Suzuki Katana AY50 Race Tuning Guide”

  1. Sam Says:

    Ive got a katana 03 i i think it has a cdi restriction but not 100% sure.

    When i am going down hills it pulls back and wont let me go over 50 and will carry on doing so its better for me not to rev at all. . . .

    Could you veryify if my year ( suzuki katana ay50 2003) Has a cdi restriction.

    Thanks

  2. jake betts Says:

    hi
    i have a techingas race exhaust, not sure which model.

    after fitting it, i could hardly reach 15mph.
    It must be as the manifold as exspansion chamber are so small compared to my original suzuki exhaust, which reached 45 mph with ease.

    Do i need lighter rollers to pick higher revs?
    would benice to see a email back

    jakebetts92@googlemail.com

  3. Bob flemington Says:

    i got a 06 katana with a leo vince TT pipe and rollers, the other day it just would’nt start. any ideas?

  4. hugh Says:

    hi i have a 2006 50cc derestricted suzuki katana and was wondering how much speed and power will i gain if i put on a giannelli performance exhaust.please reply.thanks

  5. hugh Says:

    hi i have a 2006 derestricted suzuki katana and was wondering how much speed and power will i gain if i put on a giannelli performance exhaust nd what kind of gianelli exhaust should i put on to gain the most speed and power out of my scooter.please reply.thanks hbrehers@msn.com

  6. chris Says:

    hi i have a 51 plate katana lc and when i reach 45 and stay at dat speed for a period of time it bogs down then cuts out can anyone help me with this problem i think the carb is the problem because all the mixture screws are chewed p does anyone no wer i can buy new parts for this bike
    ty

  7. Wz0ds Says:

    check it out, best online game there : wz0ds.ybrute.com come all and have fun when you have free time from riding your scooters :)

  8. Faster Suzuki Master Says:

    You should be getting near 100mph with a giannelli performance exhaust. The most expensive one is the best, but it doesn’t really cost that much really: £300. Its worth it though!

  9. kirt Says:

    hi i have a 98 suzuki ay50 katana wrw its got leo vince exhaust 70cc big bore molosi 5.1 rollers and bin rejetted i havent checked the cdi as im not sure if its restricting it it will go about 55 but wen its cold it goes nuts the front end lifts and tops out at 60 is there anyway to keep the bike doing 60 when warm?
    thanks simmons669@btinternet.com

Leave a Reply

Featured & Popular Articles

ANR Signs - Scooter Decals The Scooter Shop Your Ad Here